Assembly instructions:
1. locate base and vertical side panels (2). attach vertical side panels to base using four 1.5" bolts. fasten with nuts.
2. locate rear vertical panel. attach rear vertical panel to vertical side panels and base using six 1.5" bolts. fasten with nuts. you have now assembled a unit.
3. repeat steps 1 and 2 four times using all remaining bases, vertical side panels, and rear panels. you should end with a total of five units.
4. locate legs (4). attach legs to the base of one of the units using eight 1" bolts. fasten with nuts. stand the unit upright on its legs.
5. with this unit standing upright, stack another unit on top of the standing unit and attach it using six 2" bolts. fasten with nuts.
6. repeat step 5 for all remaining units, stacking them one on top of another and then securing them using 2" bolts and nuts.
7. locate top horizontal panel. attach top horizontal panel to the top of the highest unit using four 1.75" bolts. fasten with nuts.
which of the following best describes the way in which the fabrica13 is assembled?
a. parts are used to build individual structures. these structures are then combined to form the whole, which is assembled from the bottom up.
b. parts are combined to form the whole, which is assembled from the top down
c. individual structures are broken down into parts. these pieces are then combined to form the whole, which is assembled from the top down.
d. individual structures are modified to fit the specific needs of the customer. then the whole is assembled from the bottom