Engineering, 03.03.2022 14:00 torresfatima20pa6p1r
Consider a power transistor encapsulated in an aluminum case that is attached at its base to a square aluminum plate of thermal conductivity k = 240 W/m. K, thickness L = 8 mm, and width W = 24 mm. The case is joined to the plate by screws that maintain a contact pressure of 1 bar, and the back surface of the plate transfers heat by natural convection and radiation to ambient air and large surroundings at T[infinity] = Tsur = 30°C. The surface has an emissivity of ε = 0.9, and the convection coefficient is h = 8 W/m^2 · K. The case is completely enclosed such that heat transfer may be assumed to occur exclusively through the base plate.
Requried:
a. If the air-filled aluminum-to-aluminum interface is characterized by an area of Ac = 2 × 10^−4 m^2 and a roughness of 10 μm, what is the maximum allowable power dissipation if the surface temperature of the case, Ts, c, is not to exceed 85°C?
b. The convection coefficient may be increased by subjecting the plate surface to a forced flow of air. Explore the effect of varying the coefficient over the range 4 ≤ h ≤ 200 W/m^2K.
Answers: 3
Engineering, 04.07.2019 18:10
Aflywheel accelerates for 5 seconds at 2 rad/s2 from a speed of 20 rpm. determine the total number of revolutions of the flywheel during the period of its acceleration. a.5.65 b.8.43 c. 723 d.6.86
Answers: 2
Engineering, 04.07.2019 18:10
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
Engineering, 04.07.2019 18:10
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
Engineering, 04.07.2019 18:10
Machinery that is a key part of the process and without which the plant or process cannot function is classifed as: (clo4) a)-critical machinery b)-essential machinery c)-general purpose machinery d)-none of the specified options.
Answers: 1
Consider a power transistor encapsulated in an aluminum case that is attached at its base to a squar...
Mathematics, 19.09.2019 06:01
Mathematics, 19.09.2019 06:01
Mathematics, 19.09.2019 06:01
Social Studies, 19.09.2019 06:01
Health, 19.09.2019 06:01
History, 19.09.2019 06:01
Mathematics, 19.09.2019 06:01
Mathematics, 19.09.2019 06:01
Mathematics, 19.09.2019 06:01
Mathematics, 19.09.2019 06:01