subject
Engineering, 11.02.2022 21:30 damari9288

Find how 1 g of chlorobenzene and 1 g of hexachlorobenzene distribute into an environment at 25 °C containing the following phases (all are present in the system and consider only equilibrium). 1 L of water containing 100 mg/L dissolved organic carbon
1 kg (dry)MM of soil containing 1% organic carbon
1 L of air
a. Consider no NAPL present- Is this possible?
b. Consider 10 mL of an oily aromatic solvent (ρ=0.8g/cm3 , rMW 100 g/mole) in which both chlorobenzene and hexachlorobenzene form an ideal phase. This is in addition to the phases identified above.
Properties of the compounds
Chlorobenzene Hexachlorobenzene
Log Kow =2.64 Log Kow = 5.86
Solubility in water =502 mg/L Solubility in water = 0.006 mg/L
Vapor Pressure = 12.1 mmHg Vapor Pressure = 1.23x10-5 mmHg

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa
Answers: 1
question
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
question
Engineering, 04.07.2019 18:20
Asimple rankine cycle uses water as the working fluid. the water enters the turbine at 10 mpa and 480c while the condenser operates at 6 kpa. if the turbine has an isentropic efficiency of 80 percent while the pump has an isentropic efficiency of 70 percent determine the thermal efficiency
Answers: 1
question
Engineering, 04.07.2019 18:20
Atank with constant volume contains 2.27 kg of a mixture of water phases (liquid-vapor). in the initial state the temperature and the quality are 127 °c and 0.6, respectively. the mixture is heated until the temperature of 160 oc is reached. illustrate the process in a t-v diagram. then, determine (1) the mass of the vapor in kg at the initial state, (2) the final pressure in kpa.
Answers: 3
You know the right answer?
Find how 1 g of chlorobenzene and 1 g of hexachlorobenzene distribute into an environment at 25 °C c...
Questions
question
Chemistry, 06.05.2020 00:31
question
History, 06.05.2020 00:31
Questions on the website: 13722363