For some metal alloy, the following engineering stresses produce the corresponding engineering plastic strains prior to necking. On the basis of this information, what engineering stress (in MPa) is necessary to produce an engineering plastic strain of 0.250 Engineering stress (MPa) Engineering strain
203 0.160
224 0.289

Consider a 1.2 meter high and 2 meter wide glass window whose thickness is 6 mm and thermal conductivity is 0.78 w/m °c. the room temperature is maintained at 24 °c, while the outdoor temperature is -5 °c. the convective heat transfer coefficients on the inner and outer surfaces of the window are 10 w/m2 °c and 25 w/m2 °c respectively. (a) draw the thermal resistance network, etermine the steady rate of heat transfer t e glass window (c) determine the temperature of the inner surface of the window