subject
Engineering, 18.01.2022 14:00 glenn4572

1. When choosing a respirator for your job, you must conduct a test.
A) Weight
B) Practice
Co Fit
haz
D) Breathing

ansver
Answers: 3

Another question on Engineering

question
Engineering, 03.07.2019 15:10
Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.
Answers: 1
question
Engineering, 06.07.2019 04:20
Steam in a heating system flows through tubes whose outer radius is 2.5 cm and whose walls are maintained at a temperature of 180 °c . circular aluminum alloy 2024-t6 fins ( k= 186 wm. k) of outer radius 3 cm and constant thickness 1 mm are attached to the tube. the space between the fins is 3 mm and thus there are 250 fins per meter of tube length. heat is transferred to the surrounding air at too-25 °c, with a heat transfer coefficient of 40 w/m2. k. manufacturer a claims that this system is rated at 3.5 kw per meter of tube length. if the fins are an integral part of the steam tube, find the heat transfer rate in kw for a 1-m length of tube. is manufacturer a's claim valid? compare the heat transfer rate from 1 meter of tube length if there are no fins.
Answers: 3
question
Engineering, 06.07.2019 04:30
List three applications of coordinate measuring machine (cmm)
Answers: 3
question
Engineering, 06.07.2019 05:20
A200-mm wide strip 25 mm thick is fed through a rolling mill w/two powered rolls each of radius = 250 mm. the work thickness is to be reduced to 22 mm in one pass at a roll speed of 60 rev/min. the average flow stress of the work material, as it passes through the rolls is 175 mpa. the friction coefficient between rolls and work material is 0.20. 1, determine a)-if friction is sufficient for rolling.b)- if friction is sufficient: c)- calculate roll force i calculate roll torque. d)- calculate roll power.
Answers: 2
You know the right answer?
1. When choosing a respirator for your job, you must conduct a test.
A) Weight
B) Pra...
Questions
question
Mathematics, 06.12.2019 07:31
question
Mathematics, 06.12.2019 07:31
question
Mathematics, 06.12.2019 07:31
question
Mathematics, 06.12.2019 07:31
question
Mathematics, 06.12.2019 07:31
Questions on the website: 13722362