Engineering, 24.12.2021 23:30 brisamauro27
For manual cutting operations the travel angle should be a push angle of ?
Answers: 2
Engineering, 04.07.2019 18:10
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
Engineering, 04.07.2019 18:10
Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.
Answers: 2
Engineering, 04.07.2019 18:20
Inspection for bearing condition will include: (clo4) a)-color b)-smell c)-size d)-none of the above
Answers: 1
Engineering, 04.07.2019 18:20
An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid
Answers: 3
For manual cutting operations the travel angle should be a push angle of ?...
Computers and Technology, 19.02.2020 22:40
History, 19.02.2020 22:40
History, 19.02.2020 22:40
Biology, 19.02.2020 22:41
Mathematics, 19.02.2020 22:41
Mathematics, 19.02.2020 22:41
Health, 19.02.2020 22:41
Physics, 19.02.2020 22:42
Biology, 19.02.2020 22:42