4. To solder a fitting to copper pipe or tubing.
directly heat the:
A. Tubing.
b. Fitt...
Engineering, 16.12.2021 20:30 rouchedavisin4
4. To solder a fitting to copper pipe or tubing.
directly heat the:
A. Tubing.
b. Fitting.
c. Salder.
d. flux
Answers: 2
Engineering, 04.07.2019 18:10
Aflywheel accelerates for 5 seconds at 2 rad/s2 from a speed of 20 rpm. determine the total number of revolutions of the flywheel during the period of its acceleration. a.5.65 b.8.43 c. 723 d.6.86
Answers: 2
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 18:20
Inspection for bearing condition will include: (clo4) a)-color b)-smell c)-size d)-none of the above
Answers: 1
Engineering, 04.07.2019 18:20
Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]
Answers: 1
Health, 10.12.2019 19:31
Chemistry, 10.12.2019 19:31
Mathematics, 10.12.2019 19:31
History, 10.12.2019 19:31
Biology, 10.12.2019 19:31
Social Studies, 10.12.2019 19:31
Social Studies, 10.12.2019 19:31
Biology, 10.12.2019 19:31
History, 10.12.2019 19:31
Mathematics, 10.12.2019 19:31
Physics, 10.12.2019 19:31