Engineering, 05.12.2021 17:20 saniyawilliams1207

Heat is being transferred from water to air through a brass wall having thermal conductivity of 75 W/mK. The size of brass wall is 0.5 m x 0.5 m. The mean temperature of wall and air are 90C and 30C, respectively. It is desired to increase the heat transfer rate by adding rectangular brass fins 1 mm thick, 25 mm in length and pitched 10 mm apart (center to center). Convective heat transfer coefficient between the wall and the air is 15 W/m2 K. a. Calculate the increase in the heat transfer from the wall as a result of adding fins.
neglect heat loss from the tip.
b. Determine the overall effectiveness of the fins.

Heat is being transferred from water to air through a brass wall having thermal conductivity of 75

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 16:10

The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Burgers vector is generally parallel to the dislocation line. a)-true b)-false

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.

Answers: 1

Answer

You know the right answer?

Heat is being transferred from water to air through a brass wall having thermal conductivity of 75 W...