Uma chaveta está sujeita a uma força tangencial de 12000 N. O eixo onde esta chaveta será montada possui diâmetro de 42 mm. Deseja-se utilizar na fabricação dessa chaveta o Aço ABNT 1045 (se = 400 MPa). O coeficiente de segurança a ser adotado no projeto é igual a 4, determinar o comprimento mínimo da chaveta para resistir aos esforços de cisalhamento. Dados: Largura da chaveta W = 12 mm e Altura H = 8 mm.

Aloaded platform of total mass 500 kg is supported by a dashpot and by a set of springs of effective stiffness 72 kn/m. it is observed that when the platform is depressed through a distance x = 12.5 cm below its equilibrium position and then released without any initial velocity; it reaches its equilibrium position in the shortest possible time without overshoot. find the position and velocity of the loaded platform 0.10 sec. after its release. if a further load of 400 kg is added to the platform, find, i) the frequency of damped vibrations, and i) the amplitude of vibration after 2 complete oscillations, given that the initial amplitude is 15 cm.

Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.

Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk