Determine the moment M that should be applied to the beam in order to create a compressive stress at point D of . Also sketch the stress distribution acting over the cross section and calculate the maximum stress developed in the beam.

Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false

Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk

The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody