subject
Engineering, 03.12.2021 05:40 smokemicpot

Date: 1.
What is the first thing a person must do before anything can be done to a
corroded area?

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
If a particle moves along a path such that r : (3 sin t) m and ? : 2t rad, where t is in seconds. what is the particle's acceleration in m/s in 4 seconds? a)- 16.43 b)- 16.29 c)- 15.21 d)- 13.79
Answers: 1
question
Engineering, 04.07.2019 18:10
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
question
Engineering, 06.07.2019 02:30
1in2 processor chip can be modelled as an isothermal plane wall of silicon, isothermal on both sides. the power input to the bottom of the plane wall, or the processing power of the chip, often called the thermal design power (tdp), is 100w. assume the periphery is adiabatic. the silicon is 400 microns thick. the temperature at the junction, or in this case on the bottom of the isothermal plane wall, is 85°c. what is the top surface temperature, assuming that the only mode of heat transfer is conduction
Answers: 1
question
Engineering, 06.07.2019 04:20
Aflow moves in the x direction with a velocity of 10 m/s from 0 to 0.1 second and then reverses direction with the same speed from 0.1 to 0.2 second. sketch the pathline strating from x-0 and the streak! ine with dye introduced at x=0. show the streamlines for the first time interval and the second time interval.
Answers: 3
You know the right answer?
Date: 1.
What is the first thing a person must do before anything can be done to a
cor...
Questions
question
Chemistry, 19.07.2019 17:50
Questions on the website: 13722362