Engineering, 02.12.2021 21:50 ant5129
consider a unity feedback system with the forward path transfer function and a delay of 0.5 second, find the range of gain K to yield stability
Answers: 2
Engineering, 04.07.2019 18:10
Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false
Answers: 3
Engineering, 04.07.2019 18:10
Journeyman training is usually related (clo2) a)-to specific tasks b)-to cost analysis of maintenance task c)-to control process to ensure quality d)-to installation of machinery
Answers: 2
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 18:20
An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid
Answers: 3
consider a unity feedback system with the forward path transfer function and a delay of 0.5 second,...
History, 04.02.2021 01:00
Mathematics, 04.02.2021 01:00
Arts, 04.02.2021 01:00
Geography, 04.02.2021 01:00
Chemistry, 04.02.2021 01:00
Mathematics, 04.02.2021 01:00
Mathematics, 04.02.2021 01:00
Mathematics, 04.02.2021 01:00
Mathematics, 04.02.2021 01:00
SAT, 04.02.2021 01:00
Mathematics, 04.02.2021 01:00
Mathematics, 04.02.2021 01:00