Engineering, 02.12.2021 03:30 miacespedes
A power plant operates on the air standard Brayton cycle with regeneration. Air enters the compressor at 14.5 psi and 537 R, and it leaves the compressor at 60 psia. The air exits the regenerator at 1120 R, and it exits the combustion chamber at 1700 R. The compressor and turbine each have an isentropic efficiency of 0.85. The mass flow of the air is 17.8 lbm/s.
a. Sketch the corresponding T-s diagram.
b. Calculate the thermal efficiency of the cycle.
c. Calculate back work ratio.
d. Calculate the regenerator effectiveness.
e. Calculate the mass flow rate of the air, in lb/s.
Answers: 1
Another question on Engineering
Engineering, 04.07.2019 18:10
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.
Answers: 3
Engineering, 04.07.2019 18:10
An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature
Answers: 2
Engineering, 04.07.2019 18:20
Vibration monitoring this technique uses the noise or vibration created by mechanical equipment and in seme cases by plant systems to detemine their actual condtion. a)- true b)- false
Answers: 2
Engineering, 04.07.2019 18:20
Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?
Answers: 3
You know the right answer?
A power plant operates on the air standard Brayton cycle with regeneration. Air enters the compresso...
Questions
Mathematics, 09.07.2021 23:50
Computers and Technology, 09.07.2021 23:50
English, 09.07.2021 23:50
Mathematics, 09.07.2021 23:50
Mathematics, 09.07.2021 23:50
Mathematics, 09.07.2021 23:50
Mathematics, 09.07.2021 23:50
