subject
Engineering, 01.12.2021 01:00 ParallelUniverse

2. (a) Calculate the actual temperature of exhaust gas from a diesel engine if the measuring thermocouple reads 500oC and the exhaust pipe is 350oC. The emissivity of thermocouple is 0.7 and the convective heat transfer coefficient of the flow over thermocouple is 200 w/m2-oC. (b) Assume a shield is used to reduce the error. If the shield temperature is about 460oC, calculate the error in output temperature. (Problem 9.39 and 9.41on page 335)

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
question
Engineering, 04.07.2019 18:10
Determine whether or not it is possible to compress air adiabatically from k to 140 kpa and 400 k. what is the entropy change during this process?
Answers: 3
question
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
question
Engineering, 04.07.2019 19:10
The sum of the normal stresses does not change as the stress state rotates through an angle. a)-trune b)- false
Answers: 2
You know the right answer?
2. (a) Calculate the actual temperature of exhaust gas from a diesel engine if the measuring thermoc...
Questions
question
World Languages, 11.01.2021 17:20
question
English, 11.01.2021 17:20
question
Business, 11.01.2021 17:20
Questions on the website: 13722363