Please help write the code in the attached file based on the marking checklist. Change Machine
Ask the user to input the cost of some
item, and then ask for how much
money was paid. Print out the least
number of quarters, dimes, nickels,
and pennies that will be returned as
change.

Example:
Enter the price:
5.00
Enter the amount paid:
4.33
Change owed: 0.67
Quarters: 2
Dimes: 1
Nickels: 1
Pennies: 2

Marking Checklist
1 K/U Runs without error
1 A A Method of ending gracefully (loop to run program again)
1 A Includes error checking
1 K/U Solves stated problem, determines coin distribution
1 C Code has descriptive comments

Specific Requirements:
1 T/I Input to console
2 T/I At least 2 Functions, 1 with a return
1 T/I If Statements or Loops
5 T/I Correct calculations
1 T/I Output to console

Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan

What is creep? what is stress relaxation?

Acommercial grade cubical freezer, 4 m on a side, has a composite wall consisting of an exterior sheet of 5.0-mm thick plain carbon steel (kst= 60.5 w/m k), an intermediate layer of 100-mm thick polyurethane insulation (kins 0.02 w/m k), and an inner sheet of 5.0- mm thick aluminium alloy (kal polyurethane insulation and both metallic sheets are each characterized by a thermal contact resistance of r 2.5 x 104 m2 k/w. (a) what is the steady-state cooling load that must be maintained by the refrigerator under conditions for which the outer and inner surface temperatures are 25°c and -5°c, respectively? (b) for power saving purpose, which wall material should be increased/reduced in. thickness in order to reduce 50% of the cooling load found in part (a)? redesign the thickness of the proposed material. 177 w/m-k). adhesive interfaces between the q=575.93 w