Engineering, 25.11.2021 07:20 npaslayoy1bzj
A bending operation is performed on cold-rolled steel sheet in a V die. The die opening is 25 mm. The sheet is 4.0 mm thick and 25 mm wide. The tensile strength of the material is 300MPa. The resulting sheet metal part has an angle of 30 and a bend radius of 6 mm. Determine the bend allowance in mm.
Answers: 2
Engineering, 04.07.2019 18:10
Aflywheel accelerates for 5 seconds at 2 rad/s2 from a speed of 20 rpm. determine the total number of revolutions of the flywheel during the period of its acceleration. a.5.65 b.8.43 c. 723 d.6.86
Answers: 2
Engineering, 04.07.2019 18:10
The higher the astm grain size number, the finer the gran is. a)-true b)-false
Answers: 2
Engineering, 04.07.2019 18:10
Assuming compressible flow of air and that the measurements are done at flagstaff a pitot static tube that gives the difference of total and static pressure measures 0.35 m of mercury. what is the velocity of air? assume the temperature to be 300k. (submit your excel or matlab calculation sheet)
Answers: 1
Engineering, 04.07.2019 18:20
Inadequate stores control is not an obstacle to effective work order system. (clo4) a)-true b)-false
Answers: 3
A bending operation is performed on cold-rolled steel sheet in a V die. The die opening is 25 mm. Th...
Arts, 03.12.2021 05:30
Mathematics, 03.12.2021 05:30
Social Studies, 03.12.2021 05:30
Computers and Technology, 03.12.2021 05:30
World Languages, 03.12.2021 05:30
Chemistry, 03.12.2021 05:30
Social Studies, 03.12.2021 05:30
Chemistry, 03.12.2021 05:30
Social Studies, 03.12.2021 05:30
Computers and Technology, 03.12.2021 05:30
Mathematics, 03.12.2021 05:30
Computers and Technology, 03.12.2021 05:30
Computers and Technology, 03.12.2021 05:30