g What is the resultant phase or phases present in this eutectoid steel after the following heat treatment cycle: First quenched to Ms>T>MF at a cooling rate faster than the critical cooling rate and held for t > 104 sec, followed by reheating to T > 727 o C and held for a long time, and then quenched to Ms < T < TN at a rate faster than the CCR, and held for t > 104 seconds and then quench to room temperature?

Along 8-cm diameter steam pipe whose external surface temperature is 900c connects two buildings. the pipe is exposed to ambient air at 70c with a wind speed of 50 km/hr blowing across the pipe. determine the heat loss from the pipe per unit length. (b) air at 500c enters a section of a rectangular duct (15 cm x 20 cm) at an average velocity of 7 m/s. if the walls of the duct are maintained at 100c. a) the length of the tube for an exit temperature of the air to be 40 0c. b)the rate of heat transfer from the air. c) the fan power needed to overcome the pressure drop in this section of the duct.