2. Two formations, each 25 m thick, overlie one another. If a constant-velocity vertical flow field is set up across the set of formations with h = 120 m at the top and h = 100 m at the bottom, calculate h at the internal boundary. The hydraulic conductivity of the top formation is 0.0001 m/s and of the bottom formation 0.0010 m/s. Plot head vs. depth. Is the gradient constant, or does it change at the boundary between formations? Why must the gradient be larger in the unit with lower conductivity?

Liquid flows at steady state at a rate of 2 lb/'s through a pump, which operates to raise the elevation of the liquid 100 ft from control volume inlet to exit. the liquid specific enthalpy at the inlet is 40.09 btu/lb and at the exit is 40.94 btub. the pump requires 3 btu/s of power to operate. if kinetic energy effects are negligible and gravitational acceleration is 32.174 tt/s, the heat transfer rate associated with this steady state process is most closely 1)-2,02 btu/s from the liquid to the surroundings 2)-3.98 btu/s from the surroundings to the liquid. 3)-4.96 btu/s from the surroundings to the liquid. 4)-1.04 btu/s from the liquid to the surroundings.