subject
Engineering, 19.10.2021 01:00 liamgreene90

A mixture of hexane isomers (hexanes) is used in a parts cleaning and degreasing operation. A portion of the used solvent is recycled for further use by the following process. Used cleaning solvent containing 84.7 wt% hexanes, 5.1 wt% soluble contaminants, and the remainder particulates, is first filtered to yield a cake that is 72.0 wt% particulates and the remainder hexanes and soluble contaminants. The ratio of hexanes to soluble contaminants is the same in the dirty hexanes, the filtrate, and the residual liquid in the filter cake. The filter cake is then sent to a cooker in which nearly all of the hexanes are evaporated and later condensed. The condensed hexanes are combined with the liquid filtrate and then recycled to the parts cleaning operation for reuse. The cooked filter cake is further processed off site. a. How many lbm of cooked filter cake are produced for every 100 lbm of dirty solvent processed?
b. What is the weight percent of soluble contaminants in the cooked filter cake?

ansver
Answers: 3

Another question on Engineering

question
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
question
Engineering, 04.07.2019 08:10
Which of the following is an easy way to remember the modified “x” tire rotation? a. nondrive wheels straight, cross the drive wheels b. drive wheels straight, cross the nondrive wheels c. drive wheels crossed, nondrive wheels straight d. drive wheels crossed, nondrive wheels crossed
Answers: 1
question
Engineering, 04.07.2019 18:10
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
question
Engineering, 04.07.2019 18:10
Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.
Answers: 3
You know the right answer?
A mixture of hexane isomers (hexanes) is used in a parts cleaning and degreasing operation. A portio...
Questions
question
Mathematics, 27.06.2019 00:40
Questions on the website: 13722360