A cantilevered boom is part of an assembly machine and is made from an American Standard steel beam, S4X7.7. A tool with a weight of 500lb moves continuously from the end of the 60in beam to a point 10in from the support. A.) Draw a sketch of the variation of stress versus time, and compute the maximum stress, minimum stress, mean stress, alternating stress, and stress ratio, R. B.) Analyze the mean at the place where the maximum stress would occur at any time in the cycle.

Two flowing streams of argon gas are adiabatically mixed to form a single flow/stream. one stream is 1.5 kg/s at 400 kpa and 200 c while the second stream is 2kg/s at 500 kpa and 100 ? . it is stated that the exit state of the mixed single flow of argon gas is 150 c and 300 kpa. assuming there is no work output or input during the mixing process, does this process violate either the first or the second law or both? explain and state all your assumptions.

What precautions should you take to prevent injuries when dealing with heavy loads?

Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.