Engineering, 04.10.2021 07:00 ahmedeldyame
9. Imagine that you're performing measurements on a circuit with a multimeter. You measure a total circuit
current of 2 A, and the circuit is powered by a 24 V power supply. What total resistance value would you
expect to measure in the circuit?
A. 242
Β. 48 Ω
C. 12 Ω
D. 222
Answers: 2
Engineering, 03.07.2019 14:10
The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite
Answers: 3
Engineering, 04.07.2019 18:10
Ariver flows from north to south at 8 km/h. a boat is to cross this river from west to east at a speed of 20 km/h (speed of the boat with respect to the earth/ground). at what angle (in degrees) must the boat be pointed upstream such that it will proceed directly across the river (hint: find the speed of the boat with respect to water/river)? a 288 b. 21.8 c. 326 d. 30.2
Answers: 3
Engineering, 04.07.2019 19:10
Tom is having a problem with his washing machine. he notices that the machine vibrates violently at a frequency of 1500 rpm due to an unknown rotating unbalance. the machine is mounted on 4 springs each having a stiffness of 10 kn/m. tom wishes to add an undamped vibration absorber attached by a spring under the machine the machine working frequency ranges between 800 rpm to 2000 rpm and its total mass while loaded is assumed to be 80 kg a) what should be the mass of the absorber added to the machine so that the natural frequency falls outside the working range? b) after a first trial of an absorber using a mass of 35 kg, the amplitude of the oscillation was found to be 10 cm. what is the value of the rotating unbalance? c) using me-3.5 kg.m, find the optimal absorber (by minimizing its mass). what would be the amplitude of the oscillation of the absorber?
Answers: 3
Engineering, 06.07.2019 02:30
Around steel bar, made from material with a yield stress of 750mpa, is loaded so that it has stresses co locations of maximum normal stress and maximum shear stress. use maximum shear stress and maximum distortion energy theories to calculate the safety factors for initial yielding failures.
Answers: 3
9. Imagine that you're performing measurements on a circuit with a multimeter. You measure a total c...
Mathematics, 18.11.2019 01:31
Biology, 18.11.2019 01:31
History, 18.11.2019 01:31
Mathematics, 18.11.2019 01:31
Mathematics, 18.11.2019 01:31
History, 18.11.2019 01:31
Social Studies, 18.11.2019 01:31
Mathematics, 18.11.2019 01:31