subject
Engineering, 01.10.2021 06:10 littlebunch

Ni initially at 300 K and 1 atm is taken through 2 separate processes a. An isobaric change in temperature to 900 K
b. An isothermal compression to 900 atm
i. For b, first solve by assuming that the volume of Ni is constant within the pressure range stated in the problem.
ii. Secondly, solve by assuming that the volume of Ni is not constant but depends on pressure by the expression
() = ( )[1 + ( − )]

ansver
Answers: 3

Another question on Engineering

question
Engineering, 03.07.2019 15:10
Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.
Answers: 1
question
Engineering, 04.07.2019 18:10
An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet
Answers: 3
question
Engineering, 04.07.2019 18:10
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
question
Engineering, 04.07.2019 18:10
Journeyman training is usually related (clo2) a)-to specific tasks b)-to cost analysis of maintenance task c)-to control process to ensure quality d)-to installation of machinery
Answers: 2
You know the right answer?
Ni initially at 300 K and 1 atm is taken through 2 separate processes a. An isobaric change in tem...
Questions
Questions on the website: 13722363