Carla reports a hand injury that she sustained while operating a saw after bypassing the guard on the saw, contrary to the employer's work rule. Carla’s hand injury required her to miss work for two days. Carla’s employer disciplined her for bypassing the guard contrary to its instructions. The employer regularly monitors its workforce for safety rule violations and disciplines employees who bypass machine guards regardless of whether they report injuries. Did the employer use a disciplinary program to retaliate against Carla for reporting the workplace injury?
yes or no

Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?

Along 8-cm diameter steam pipe whose external surface temperature is 900c connects two buildings. the pipe is exposed to ambient air at 70c with a wind speed of 50 km/hr blowing across the pipe. determine the heat loss from the pipe per unit length. (b) air at 500c enters a section of a rectangular duct (15 cm x 20 cm) at an average velocity of 7 m/s. if the walls of the duct are maintained at 100c. a) the length of the tube for an exit temperature of the air to be 40 0c. b)the rate of heat transfer from the air. c) the fan power needed to overcome the pressure drop in this section of the duct.

Explain in your own word the concept of a solid solution, in alloys, and how it can be created.