Engineering, 18.09.2021 03:10 BreBreDoeCCx
Determine the gage pressure at the center of pipe A in pounds per square inch and in kilopascals.
Answers: 1
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 18:10
The higher the astm grain size number, the finer the gran is. a)-true b)-false
Answers: 2
Engineering, 04.07.2019 19:10
What is a monomer? how do they form a ploymer from the view point of chemical bonding?
Answers: 1
Engineering, 04.07.2019 19:20
To save energy, the air supply to a 2000 ft office has been shut off overnight and the room temperature has dropped to 40°f. in the morning, the thermostat is reset to 70°f and warm air at 120 f begins to flov in at 200ft'/min. the air is well mixed within the room, and an equal mass flow of air at room temperature (changing with time) is withdrawn through a return duct. the air pressure is nearly 1 atm everywhere. ignoring heat transfer with the surroundings and kinetic and potential energy effects, estimate how long it takes for the room temperature to reach 70°f. plot the room temperature as a function of time.
Answers: 1
Determine the gage pressure at the center of pipe A in pounds per square inch and
in kilopascals....
Chemistry, 24.10.2019 14:43
Mathematics, 24.10.2019 14:43
Mathematics, 24.10.2019 14:43
Mathematics, 24.10.2019 14:43
History, 24.10.2019 14:43
History, 24.10.2019 14:43
Physics, 24.10.2019 14:43
Mathematics, 24.10.2019 14:43
Geography, 24.10.2019 14:43
Chemistry, 24.10.2019 14:43
History, 24.10.2019 14:43