Engineering, 08.09.2021 03:40 lalaokawami0912
Lumber before it is seasoned may have a moisture content ranging from to percent?
Answers: 2
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 18:20
Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?
Answers: 3
Engineering, 04.07.2019 19:10
With increases in magnification, which of the following occur? a. the field of view decreases. b. the ambient illumination decreases. c. the larger parts can be measured. d. the eyepiece must be raised.
Answers: 1
Engineering, 04.07.2019 19:10
Starting wih an energy balance on a rectangular volume element, derive the one- dimensional transient heat conduction equation for a plane wall with constant thermal conductivity and no heat generation.
Answers: 1
Lumber before it is seasoned may have a moisture content ranging from to percent?...
Social Studies, 02.10.2021 14:00
Geography, 02.10.2021 14:00
Mathematics, 02.10.2021 14:00
Mathematics, 02.10.2021 14:00
Social Studies, 02.10.2021 14:00
Biology, 02.10.2021 14:00
Mathematics, 02.10.2021 14:00
Mathematics, 02.10.2021 14:00
Social Studies, 02.10.2021 14:00
History, 02.10.2021 14:00
SAT, 02.10.2021 14:00