Engineering, 18.08.2021 14:00 brookealexis5768

- figure is the aschematic drawing of asolid counter Shaft that supports two flat belt zulless each having ason weight. For each puller, the best rensions are parallel and the coessicient de friction between the belt and Pelley Ais oils. If a cold-drawn wNs G10180 steel shast of wintorn diameter many w material properties of allowable strength in shear and intenders be taken as 220 MPa 440 MPa respectively. Determine the minimum Preferred size diameter in accordance to the ASME code usino km= 15 and Kt=1.0. Neglect the effect of mass and thickness of belts and mass of the shaft,

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Describe one experiment in which the glass transition temperature and melting temperature of a totally amorphous thermoplastic material can be determined. show the relevant experimental results in a diagram which should be properly annotated with the two temperatures clearly marked. what is likely to happen to the curve in the diagram if the amorphous polymer is replaced by a thermosetting type?

Answers: 2

Answer

You know the right answer?

- figure is the aschematic drawing of asolid counter Shaft that supports two flat belt zulless each...

Questions