Cojinete de desembrague Fa.
Identifica los datos e incógnita y escríbelos.
Escribe correctame...
Engineering, 11.08.2021 17:10 josephicarusmarrujo
Cojinete de desembrague Fa.
Identifica los datos e incógnita y escríbelos.
Escribe correctamente la ecuación que vas a utilizar.
Coloca los datos en las variables de la ecuación y desarrollala.
Analiza el resultado obtenido.
Escribe la respuesta obtenida junto a una conclusión que exprese tu interpretación.
Answers: 1
Another question on Engineering
Engineering, 04.07.2019 18:10
Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.
Answers: 2
Engineering, 04.07.2019 18:10
Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan
Answers: 3
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 18:20
Amixture of slurry and mud is to be pumped through a horizontal pipe of diameter 500 mm. the fluid behaves as a bingham plastic with a yield stress of 30 pa and viscosity 0.04 pa.s. describe the effects of the shear stress through a transverse section of the pipe by plotting the variation in shear stress and velocity profile: (i) just before the slurry starts to move (ii) as the slurry flows when the pressure gradient is double that in part (i)
Answers: 3
You know the right answer?
Questions
Health, 13.08.2021 01:00
