Engineering, 10.08.2021 15:10 kpopqueen0
The following data pertains to a hydraulic press:
The diameters of the plunger and ram are 50 mm and 0.5 m respectively.
The ram is 1.75 m below the plunger and the mass density of the liquid
in the hydraulic press is 820 kg/m3. The mass of the plunger and the ram
are 6 kg and 400 kg respectively. The plunger is forced vertically down
by a lever with a mechanical advantage of 6 to 1 onto which a force of
800 N is applied. The ram moves upwards when the plunger moves
downwards. Determine the maximum lifting force exerted by the ram.
Answers: 3
Another question on Engineering
Engineering, 03.07.2019 19:30
When using the ohmmeter function of a digital multimeter, the leads are placed in what position relative to the component being tested? a. parallel b. control c. series d. line
Answers: 3
Engineering, 04.07.2019 18:20
Asimple rankine cycle uses water as the working fluid. the water enters the turbine at 10 mpa and 480c while the condenser operates at 6 kpa. if the turbine has an isentropic efficiency of 80 percent while the pump has an isentropic efficiency of 70 percent determine the thermal efficiency
Answers: 1
Engineering, 04.07.2019 18:20
Apiston-cylinder device contains 0.1 m3 of liquid water and 0.9 m3 of water vapor in equilibrium at 800 kpa. heat is transferred at constant pressure until the temperature of water reaches 350 °c. determine (a) the quality of water at the initial state (b) the work associated with this process, (c) the heat associated with this process.
Answers: 2
You know the right answer?
The following data pertains to a hydraulic press:
The diameters of the plunger and ram are 50 mm an...
Questions
Health, 24.02.2021 22:30
Mathematics, 24.02.2021 22:30
History, 24.02.2021 22:30
Mathematics, 24.02.2021 22:30
Mathematics, 24.02.2021 22:30
Mathematics, 24.02.2021 22:30
Health, 24.02.2021 22:30
Geography, 24.02.2021 22:30
Health, 24.02.2021 22:30
Mathematics, 24.02.2021 22:30
