Engineering, 31.07.2021 07:50 ricardodeleon152
Vẽ sơ đồ cấu tạo , đồ thị công chỉ thị và mô tả nguyên lý hoạt động của động cơ xăng
4 kỳ
Answers: 1
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 18:10
Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.
Answers: 1
Engineering, 04.07.2019 18:10
True or false (explain) (110)[111] is a slip system in bcc metals . the {111} family in fcc contains 8 planes. resolved shear stress (rss) in single crystals is just related to the applied stress. critical resolved shear stress (crss) in single crystal metals is direct proportional to the number of defects in the structure
Answers: 2
Engineering, 04.07.2019 18:10
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
Vẽ sơ đồ cấu tạo , đồ thị công chỉ thị và mô tả nguyên lý hoạt động của động cơ xăng
4 kỳ...
4 kỳ...
Mathematics, 23.07.2019 05:30
Mathematics, 23.07.2019 05:30
Social Studies, 23.07.2019 05:30
Biology, 23.07.2019 05:30
Mathematics, 23.07.2019 05:30
Biology, 23.07.2019 05:30