Engineering, 27.07.2021 20:00 siddhi50

A hybrid lamina uses glass and graphite fibers in a matrix of epoxy for its construction. The fiber volume fractions of glass and graphite are 40 and 20%, respectively. The specific gravity of glass, graphite, and epoxy is 2.6, 1.8, and 1.2, respectively. Find
a. The weights fractions of the fibers and the matrix.
b. The density of the composite

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:20

Air is compressed isentropically from an initial state of 300 k and 101 kpa to a final temperature of 1000 k. determine the final pressure using the following approaches: (a) approximate analysis (using properties at the average temperature) (b) exact analysis

Answers: 1

Answer

Engineering, 04.07.2019 18:20

For a gate width of 2 m into the paper, determine the force required to hold the gate abc at its location.

Answers: 1

Answer

Engineering, 05.07.2019 23:20

Which one of the following faults cause the coffee in a brewer to keep boiling after the brewing cycle is finished? a. an open circuit in the heating element b. a short circuit at the terminals c. welded contacts on the thermostat d. a leak around the gasket

Answers: 3

Answer

Engineering, 06.07.2019 03:30

Give three differences between corrosion of metals and the corrosion of ceramics? what is static fatigue?

Answers: 1

Answer

You know the right answer?

A hybrid lamina uses glass and graphite fibers in a matrix of epoxy for its construction. The fiber...

Questions