Engineering, 14.07.2021 15:50 errinbaker4683

A spur pinion and gear pair is used to transmit a power of 25 kW. The teeth number of pinion is 18. The distance between the centers of the pinion and the gear is 144 mm. The sped ratio is 3, the
pressure angle is 20o and the face width is 50 mm. The rotational speed of pinion is 1200 rev/min. The
pinion and the gear material are through hardened Grade-2 with a hardness of 300 Brinell. The quality
standard number Qv is 7 and installation is open gearing quality. The power source and the driven
machine are subjected to medium and moderate shocks, respectively. Find the AGMA bending and
contact stresses and the corresponding factors of safety for a pinion life of 107 cycles and a reliability of
0.99.

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 08:10

Which of the following is an easy way to remember the modified “x” tire rotation? a. nondrive wheels straight, cross the drive wheels b. drive wheels straight, cross the nondrive wheels c. drive wheels crossed, nondrive wheels straight d. drive wheels crossed, nondrive wheels crossed

Answers: 1

Answer

Engineering, 04.07.2019 18:10

During a steady flow process, the change of energy with respect to time is zero. a)- true b)- false

Answers: 2

Answer

Engineering, 04.07.2019 18:10

At 12 noon, the count in a bacteria culture was 400; at 4: 00 pm the count was 1200 let p(t) denote the bacteria cou population growth law. find: (a) an expression for the bacteria count at any time t (b) the bacteria count at 10 am. (c) the time required for the bacteria count to reach 1800.

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Asimple rankine cycle uses water as the working fluid. the water enters the turbine at 10 mpa and 480c while the condenser operates at 6 kpa. if the turbine has an isentropic efficiency of 80 percent while the pump has an isentropic efficiency of 70 percent determine the thermal efficiency

Answers: 1

Answer

You know the right answer?

A spur pinion and gear pair is used to transmit a power of 25 kW. The teeth number of pinion is 18....

Questions