Engineering, 13.07.2021 06:20 jerry1496
A laboratory cell, contained 290cc of reservoir liquid at its bubble point of 2100 psia
at 145°F. 21cc of mercury were removed from the cell and the pressure dropped to 1700
psia. Mercury was then re-injected at constant temperature and pressure and 0.153 SCF of
gas was removed leaving 270cc of liquid in the cell. The process was repeated reducing the
pressure to 14.7 psia and the temperature to 60°F. Then 0.45 SCF of gas was removed and
207.5cc of liquid remained in the cell
Answers: 3
Another question on Engineering
Engineering, 04.07.2019 18:10
Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false
Answers: 3
Engineering, 04.07.2019 18:10
Which of the following ziegler nichols tuning methods the response of the controller to a step input should exhibit an s-shaped curve? a)-open loop mode b)-closed loop mode c)-both modes (open & closed) d)-none of the modes (open & closed)
Answers: 3
Engineering, 04.07.2019 18:10
Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.
Answers: 3
Engineering, 04.07.2019 18:20
Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
You know the right answer?
A laboratory cell, contained 290cc of reservoir liquid at its bubble point of 2100 psia
at 145°F. 2...
Questions
Mathematics, 14.04.2020 23:34
Biology, 14.04.2020 23:34
Mathematics, 14.04.2020 23:34
English, 14.04.2020 23:34
History, 14.04.2020 23:34
Arts, 14.04.2020 23:34
