subject
Engineering, 01.07.2021 17:40 janilaw1

Given the 1-hour unit hydrograph for a particular watershed, determine the peak flow for a 3-hour storm with direct runoff of 3 cm in the first hour, 2 cm in the second hour, and 4 cm in the third hour 1-hour Unit Hydrograph
Time (hr) 0 1 2 3 4 5 6 7 8
Q(m^3/s) 0 2 4 7 5 3 2 1 0

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false
Answers: 3
question
Engineering, 04.07.2019 18:10
Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.
Answers: 2
question
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
question
Engineering, 04.07.2019 18:20
Water vapor initially at 10 bar and 400 °c is contained within a piston-cylinder assembly. the water lost heat to the surrounding according to isochoric (iso-volumetric) process until its temperature is 150 °c. the water is then condensed isothermally to saturated liquid. for the water as a system, calculate the work in kj/kg
Answers: 2
You know the right answer?
Given the 1-hour unit hydrograph for a particular watershed, determine the peak flow for a 3-hour st...
Questions
question
Mathematics, 10.01.2020 08:31
Questions on the website: 13722365