subject
Engineering, 30.06.2021 18:40 jakeisadog698

100 kg of - is to be cooled from 10 degrees * C to - 20 degrees * C . The diameter of the Spherical liver equals 7cm. Assume that the density of the liver is equal to 1000 kg/m3 , heat transfer coefficient and convection equals to 50 W/m2 . K. (the air temperature equals -30 C.) A. chose one only 1- Using the specific heat, determine the amount of heat that must be removed from the lamb. 2- How much actual heat must be removed during this process? B. Estimate the time required for freezing. l ​

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:20
Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?
Answers: 3
question
Engineering, 04.07.2019 18:20
Ahe-xe mixture containing a 0.75 mole fraction of helium is used for cooling electronics in an avionics application. at a temperature of 300 k and atmospheric pressure, calculate the mass fraction of helium and the mass density, molar concentration and molecular weight of the mixture. if the cooling capacity is 10 l, what is the mass of the coolant?
Answers: 3
question
Engineering, 04.07.2019 18:20
Air is compressed isentropically from an initial state of 300 k and 101 kpa to a final temperature of 1000 k. determine the final pressure using the following approaches: (a) approximate analysis (using properties at the average temperature) (b) exact analysis
Answers: 1
question
Engineering, 04.07.2019 18:20
A2-m rigid tank initially contains saturated water vapor at 100 kpa. the tank is connected to a supply line through a valve. steam is flowing in the supply line at 600 kpa and 300 c. the valve is opened, and steam is allowed to enter the tank until the pressure in the tank reaches the line pressure, at which point the valve is closed. a thermometer placed in the tank indicates that the temperature at the final state is 200°c. determine (a) the mass of steam that has entered the tank (b) the amount of heat transfer.
Answers: 3
You know the right answer?
100 kg of - is to be cooled from 10 degrees * C to - 20 degrees * C . The diameter of the Spherical...
Questions
question
Mathematics, 31.07.2019 14:30
Questions on the website: 13722367