R-134a is throttled in a line flowing at 25oC, 750 kPa with negligible kinetic energy to a pressure of 165 kPa. Find the exit temperature and the ratio of the exit pipe diameter to that of the inlet pipe (Dex/Din) so that the velocity stays constant.

Solution :

For R-134a, we are given :

Now we have one inlet and one exit flow, no work and no heat transfer. The energy equation is :

We also know that the gas is throttled and there is no change in the kinetic energy.

So,

Now from the energy equation above, we can see that the inlet and the exit enthalpies are also the same. Therefore,

From the saturated R-134a table, corresponding to , we can find the exit saturation temperature.

From the saturated R-134a table, corresponding to , we can find the specific enthalpies :

Calculating the exit flow quality factor,

   = 0.26

From the saturated R-134a table, corresponding to , we can find the specific volumes :

Calculating the exit specific volume :

   = 0.000746 + 0.26 (0.11932)

   = 0.0318

The mass flow is equal to :

So,

Therefore, the ratio of the exit pipe and the inlet pipe diameter is equal to

i think i backed my dad

a true.

the warning light flashes for a second or two when the engine starts. if it stays on, there's must be something wrong with the coolant. you should never dare to continue driving when the light is on. pull over as soon as possible and shut the engine off.

hope this is what you're talking about