Engineering, 24.06.2021 15:30 makaylahendrix8808

Determination of an Equilibrium Constant Are you completing this experiment online? A. Determination of initial concentrations Volume of 0.25 M NaOH added (mL) 33.00
B. Determination of the Blank Volume of 0.25 M NaOH added (ml) 4.06
C. Determination of Final Concentrations Volume of 0.25 M NaOH added (mL) 13.144 (10pts) Calculations and Analysis Use the data collected above and the given volumes of acetic acid and ethyl alcohol to determine the initial and equilibrium concentrations of acetic acid REPORT SUMMARY (10pts) Calculations and Analysis Use the data collected above and the given volumes of acetic acid and ethyl alcohol to determine the initial and equilibrium concentrations of acetic acid.
A. Determination of Initial Concentrations Volume of 0.25 M NaOH added 33.00 mL (2pts) Initial concentration of acetic acid (M)
B. Determination of the Blank Volume of 0.25 M NaOH added 4.06 mL
C. Determination of Final Concentrations Volume of 0.25 M NaOH added 13.14 mL
Volume of 0.25 M required to neutralize acetic acid
Final concentration of acetic acid
D. Calculation of the Equilibrium Constant Enter the equilibrium concentrations for all species and calculate the Keq for the reaction.
Equilibrium concentration of acetic acid (from above)
Equilibrium concentration of ethyl alcohol
Equilibrium concentration of ethyl acetate
Equilibrium concentration of ethyl alcohol
Equilibrium concentration of ethyl acetate
Equilibrium concentration of water

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:20

A3-mm-thick panel of aluminum alloy (k 177 w/m-k, c 875 j/kg-k and ? = 2770 kg/m) is finished on both sides with an epoxy coating that must be cured at or above t,-150°c for at least 5 min. the production line for the curing operation involves two steps: (1) heating in a large oven with air at ts,0-175°c and a convection coefficient of h, 40 w/m2. k, and (2) cooling in a large chamber with air at 25°c and a con- vection coefficient of he 10 w/m2.k. the heating portion of the process is conducted over a time interval te which exceeds the ime required to reach 150°c by 5 min (h = r + 300 s). the coating has an emissivity of ? = 0.8, and the temperatures of the oven and chamber walls are 175 and 25°c, respectively. if the panel is placed in the oven at an initial temperature of 25°c and removed from the chamber at a safe-to-touch tempera ture of 37°c, what is the total elapsed time for the two-step curing operation?

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Air flows over a heated plate àt a velocity of 50m/s. the local skin factor coefficient at a point on a plate is 0.004. estimate the local heat transfer coefficient at this point.the following property data for air are given: density = 0.88kg/m3 , viscosity 2.286 x 10 ^-5 kgm/s , k = 0.035w/mk ,cp = 1.001kj/kgk. use colburn reynolds analogy.

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Along 8-cm diameter steam pipe whose external surface temperature is 900c connects two buildings. the pipe is exposed to ambient air at 70c with a wind speed of 50 km/hr blowing across the pipe. determine the heat loss from the pipe per unit length. (b) air at 500c enters a section of a rectangular duct (15 cm x 20 cm) at an average velocity of 7 m/s. if the walls of the duct are maintained at 100c. a) the length of the tube for an exit temperature of the air to be 40 0c. b)the rate of heat transfer from the air. c) the fan power needed to overcome the pressure drop in this section of the duct.

Answers: 1

Answer

Engineering, 04.07.2019 19:20

Air enters a horizontal, constant-diameter heating duct operating at steady state at 290 k, 1 bar, with a volumetric flow rate of 0.25 m°/s, and exits at 325 k, 0.95 bar. the flow area is 0.04 m2. assuming the ideal gas model with k = 1.4 for the air, determine (a) the velocity at the inlet and exit, each in m/s, and (c) the rate of heat transfer, in kw flow rate, in kg/s, (b) the mass kg 0.3

Answers: 2

Answer

You know the right answer?

Determination of an Equilibrium Constant Are you completing this experiment online? A. Determinatio...

Questions