A stream of ethylene glycol vapor at its normal boiling point and 1atm flowing at a rate of 175 kg/min is to be condensed at constant pressure. The product stream from the condenser is liquid g lycol at the condensation temperature. a. Calculate the rate at which heat must be transferred from the condenser (kW).
b. If heat were transferred at a lower rate than that calculated in part (A), what would the state of the product stream be? (Dedu ce as much as you can about the phase and the temperature of the stream.)
c. If heat were transferred at a higher rate than that calculated in part (A), what could you deduce about the state of the product stream?

hello attached below is the question properly written

a) 2670 Kw

b) product will be made up of vapor and liquid

c) Product will be a super cooled liquid

Explanation:

mass Flow rate ( m ) = 175 kg/min

pressure = 1 atm

molecular weight of ethylene glycol ( mw ) = 62.07 g/mol

enthalpy of vaporization ( ΔHv ) = 56.9 KJ/mol

Using values from the table 8.1 related to the question

a) Determine the rate at which heat must be transferred from condenser

Using values from the table 8.1 related to the question

ΔH = 2670 Kw

b) If heat is transferred  at a lower temperature the product will be made up of vapor and liquid

c) If heat was transferred at a higher temperature the product will be a super cooled liquid

answer:

yes

explanation:

answer:

jiggy jiggy jab my titty

explanation: