Engineering, 13.06.2021 18:00 makaylagrandsta

# Example: A water sample has the following ions concentrations. Calculate the total alkalinity and total hardness.

Answers: 1

Engineering, 04.07.2019 18:10

Apump is used to circulate hot water in a home heating system. water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. the inlet pressure and temperature are 14.7 lbf/in.2, and 180Â°f, respectively; at the exit the pressure is 60 lbf/in.2 the pump requires 1/15 hp of power input. water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 btu/lb or. neglecting kinetic and potential energy effects, determine the temperature change, in Â°r, as the water flows through the pump.

Answers: 1

Engineering, 04.07.2019 18:10

Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160Â°f. a computer code is appropriate for solving this problem.

Answers: 3

Engineering, 04.07.2019 18:10

Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.

Answers: 3

Engineering, 04.07.2019 18:10

Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan

Answers: 3

Example: A water sample has the following ions concentrations.
Calculate the total alkalinity and t...

Mathematics, 20.10.2019 12:20

Mathematics, 20.10.2019 12:20

English, 20.10.2019 12:20

Mathematics, 20.10.2019 12:20

Health, 20.10.2019 12:20

Mathematics, 20.10.2019 12:30

Health, 20.10.2019 12:30

Business, 20.10.2019 12:30

History, 20.10.2019 12:30