Engineering, 28.05.2021 20:00 emma3216

Consider a superheterodyne AM receiver with different standards using IF frequency of 280 kHz with adding format, AM range of 420 kHz-1800 kHz, and the maximum frequency of the baseband signal being assigned as 6 kflz. We are tuning to station 760 kHz (1 point per part): (i) For IF filter, (center frequency, BW) is:.
(a) (760 kHz, 6 kHz).
(b) (280 kHz, 12 kHz).
(c) (280 kHz, 6 kHz).
(d) (760 kHz, 12 kHz).
(ii) For mixer filter, (center frequency, BW) is:_.
(a) (280 kHz, 12 kHz).
(b) (760 kHz, 6 kHz).
(c) (760 kHz, 12 kHz).
(d) (280 kHz, 6 kHz).
(iii) For audio filter, (center frequency, BW) is:.
(a) (0, 12 kHz).
(b) (280 kHz, 6 kHz).
(c) (0,6 kHz).
(d) (280 kHz, 12 kHz).
(iv) For the mixer oscillator the frequency is:_.
(a) 480 kHz.
(b) 1215 kHz.
(c) 940 kHz.
(d) 1040 kHz.
(v) The image station is at:.
(a) 1320 kHz.
(b) 1040 kHz.
(c) 11670 kHz.
(d) no image interference.

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10

Answers: 1

Answer

Engineering, 04.07.2019 18:10

At 12 noon, the count in a bacteria culture was 400; at 4: 00 pm the count was 1200 let p(t) denote the bacteria cou population growth law. find: (a) an expression for the bacteria count at any time t (b) the bacteria count at 10 am. (c) the time required for the bacteria count to reach 1800.

Answers: 1

Answer

Engineering, 04.07.2019 19:10

The sum of the normal stresses does not change as the stress state rotates through an angle. a)-trune b)- false

Answers: 2

Answer

Engineering, 04.07.2019 19:10

When subject to a steady load (within elastic range) over a long period of time, what is the major difference in material behavoir between steel and plastic?

Answers: 2

Answer

You know the right answer?

Consider a superheterodyne AM receiver with different standards using IF frequency of 280 kHz with a...

Questions