Engineering, 27.05.2021 07:10 davishernandez357
Which option distinguishes the step in a construction project plan represented by the following statement?
Meeting government regulations for accessibility includes the installation of specialized sound systems for the hard of hearing.
A) purpose of document
B) budget and cost management
C) roles and responsibilities
D) process steps and scheduling
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 18:10
Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise
Answers: 3
Engineering, 04.07.2019 18:10
Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.
Answers: 1
Engineering, 06.07.2019 02:30
Plot schematically the tensile stress versus strain curves for a typical thermoplastic material at a temperature below its glass transition temperature (tg and at a temperature above its tg, respectively. do the same for a typical thermosetting material. list in a table any differences or similarities between the two materials at t> tg and t < tg, respectively, and relate them to the structures of the two types of polymers
Answers: 3
Engineering, 06.07.2019 05:20
A200-mm wide strip 25 mm thick is fed through a rolling mill w/two powered rolls each of radius = 250 mm. the work thickness is to be reduced to 22 mm in one pass at a roll speed of 60 rev/min. the average flow stress of the work material, as it passes through the rolls is 175 mpa. the friction coefficient between rolls and work material is 0.20. 1, determine a)-if friction is sufficient for rolling.b)- if friction is sufficient: c)- calculate roll force i calculate roll torque. d)- calculate roll power.
Answers: 2
You know the right answer?
Which option distinguishes the step in a construction project plan represented by the following stat...
Questions
Social Studies, 04.01.2020 00:31
Social Studies, 04.01.2020 00:31
