Engineering, 24.05.2021 04:30 naomiedgrey

Dant را
salallal
Kinematics of Particle
.6 PROBLEMS INVOLVING KINEMATIC OF PARTICLES
1 An athletic champion runs at a speed of 5m/s. On hitting the ropes at the finishing
line, he starts decelerating at a constant rate of 1.3m/s2. Calculate how long it
takes him to stop and how far from the finishing line.
2 A pressurized wine bottle is opened by force and the cork shoots into the air vertically
It takes 15s to rise to its highest position. What is the velocity with which it lef
the bottle?
3 Calculate the constant acceleration required for a car starting from rest to reach
velocity of 20 m/s in 30 s.
A motorcycle accelerates at 3m/s2. It is required to attain a velocity of 100km/hr ove
a distance of 0.3km. Calculate the initial velocity of the motorcycle.
A car starting from rest accelerates at 2.5m/s2 for the first 20 s of its journey. It
then brought to a stop in another 30 s with a uniformly decreasing velocity. Wh
is the total distance travelled?

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Inspection for bearing condition will include: (clo4) a)-color b)-smell c)-size d)-none of the above

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?

Answers: 3

Answer

Engineering, 04.07.2019 19:20

Air enters a horizontal, constant-diameter heating duct operating at steady state at 290 k, 1 bar, with a volumetric flow rate of 0.25 m°/s, and exits at 325 k, 0.95 bar. the flow area is 0.04 m2. assuming the ideal gas model with k = 1.4 for the air, determine (a) the velocity at the inlet and exit, each in m/s, and (c) the rate of heat transfer, in kw flow rate, in kg/s, (b) the mass kg 0.3

Answers: 2

Answer

You know the right answer?

Dant را
salallal
Kinematics of Particle
.6 PROBLEMS INVOLVING KINEMATIC OF PARTICLES...

Questions