Engineering, 21.05.2021 22:20 nauticatyson9

How is the caliber of a rifle or handgun determined? A, The length of the barrel measured from the muzzle to the action
A, The length of the barrel measured from the muzzle to the action
The length of the barrel measured from the muzzle to the action
B, The distance between opposite lands inside the barrel
B, The distance between opposite lands inside the barrel
The distance between opposite lands inside the barrel
C, The circumference of the barrel when measured from the exterior.
C, The circumference of the barrel when measured from the exterior.
The circumference of the barrel when measured from the exterior.
D, The length of the ammunition that it can fire
D, The length of the ammunition that it can fire
The length of the ammunition that it can fire

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Assuming compressible flow of air and that the measurements are done at flagstaff a pitot static tube that gives the difference of total and static pressure measures 0.35 m of mercury. what is the velocity of air? assume the temperature to be 300k. (submit your excel or matlab calculation sheet)

Answers: 1

Answer

You know the right answer?

How is the caliber of a rifle or handgun determined? A, The length of the barrel measured from the...

Questions