Engineering, 19.05.2021 19:50 604341

Calculate the basic performance for 'PA-28-161 PIPER WARRIOR III' aircraft at sea level on the earth: a/ Service ceiling

As I know the formula of the Service ceiling (photo attached), but I don’t know how to apply it specifically. Thank you so much.
=
Here is the aircraft information and data:
- alpha = 0pi/180 (Trim Angle of attack [rad]. This should be zero since)
- alpha_0 = -2.6pi/180 (Airfoil zero-lift AOA [rad])
- Trim altitude [ft] = 0
- Aspect ratio of the wing = 7.2
- Span of the flap [ft] = 16.92 (Aileron total span)
- Span of the wing = 10.668 m
- Drag coefficient at zero lift (parasite drag) = 0.035
- 2-D maximum lift coefficient of wing = 6.22
- Cm_0_r = -0.072 (Zero lift pitching moment coefficient of the wing root)
- Cm_o_t = -0.072 (Zero lift pitching moment coefficient of the wing tip)
*** Cm_0_r = Cm_o_t because wing has no twist
- Mean aerodynamic chord of the wing [ft] = 4.846
- Oswald's efficiency factor (e_os) = 0.8333
- Weight of Airplane = 10846.44 N
- Power of the engine (Pe) = 119312
- Propeller efficiency (ηp) = 0.83
- Area of wing surface (s) = 15.806 m
- κ— proportionality constant = 1

Calculate the basic performance for 'PA-28-161 PIPER WARRIOR III' aircraft at sea level on the eart

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Apiston-cylinder device contains 0.1 m3 of liquid water and 0.9 m3 of water vapor in equilibrium at 800 kpa. heat is transferred at constant pressure until the temperature of water reaches 350 °c. determine (a) the quality of water at the initial state (b) the work associated with this process, (c) the heat associated with this process.

Answers: 2

Answer

Engineering, 04.07.2019 19:10

Apressure vessel with an r/t 20 cannot be treated as thin walled vessel. a)-trune b)- false

Answers: 3

Answer

You know the right answer?

Calculate the basic performance for 'PA-28-161 PIPER WARRIOR III' aircraft at sea level on the earth...

Questions