Engineering, 18.05.2021 18:40 isamar7342
A four-lane divided multilane highway (two lanes in each direction) in rolling terrain has five access points per mile and 11-ft lanes with a 4-ft shoulder on the right side and a 2-ft shoulder on the left. The peak-hour factor is 0.84 and the traffic stream consists of 6% trucks, 4% buses, and 3% recreational vehicles. The driver population adjustment factor is estimated at 0.90. If the analysis flow rate is 1250 pc/h/ln, what is the peak-hour volume
Answers: 3
Engineering, 03.07.2019 15:10
Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.
Answers: 1
Engineering, 03.07.2019 19:30
When using the ohmmeter function of a digital multimeter, the leads are placed in what position relative to the component being tested? a. parallel b. control c. series d. line
Answers: 3
Engineering, 04.07.2019 18:10
Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way
Answers: 2
Engineering, 04.07.2019 18:10
An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature
Answers: 2
A four-lane divided multilane highway (two lanes in each direction) in rolling terrain has five acce...
Computers and Technology, 05.12.2019 17:31
Computers and Technology, 05.12.2019 17:31