subject
Engineering, 15.05.2021 05:30 ninilizovtskt

Based on the following passage, which of the following would be an example of a sustainable input for the construction industry? Advocates for sustainable construction acknowledge that the planet’s built environment is the largest single contributor to pollution and ecosystem destruction in the world—larger even than the pollution caused by the internal combustion engine. The built environment relies on inputs of land, water use, raw materials, and energy. Its outputs include water pollution, solid waste, and carbon emissions.

A. hemp and straw

B. cold-formed steel

C. gray water

D. old-growth wood

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
The higher the astm grain-size number, the coarser the grain is. a)-true b)-false
Answers: 3
question
Engineering, 04.07.2019 18:20
Find the minimum film thickness for a journal bearing with the data below. shaft diameter, d-50 mm, clearance ratio, cdratio? 0.001, shaft speed, n 2000 rpm; bearing length. i 200 mm; eccentricity ration, ? -0.55. ( note, cdratio-ca/d) the minimum film thickness is um
Answers: 2
question
Engineering, 04.07.2019 19:10
Abarometer contains mercury with a density of 13600 kg/m3. atmospheric conditions are 95.8 kpa and 20 °c at 20 °c, the vapor pressure of the mercury is 0.000173 kpa. the column of mercury will rise to a height of most nearly. select one: a)- 0.38 m b)- 0.82 m c)- 0.48 m d)- 0.72 m
Answers: 1
question
Engineering, 04.07.2019 19:10
Afoot bridge is made as a simple deck, 4 m long, with a cross section 2 m (wide) and 20 cm thick, and made of wood. the deck is supported at the two ends. the maximum load allowable on the bridge is 10 tons, provided it is uniformly distributed on the deck. to sense this load, a strain gauge is placed at the center of the bridge and its resistance is monitored. if the sensor has a nominal resistance of 350 s2 and a gauge factor of 3.6, what is the reading of the strain gauge at maximum load? the modulus of elasticity for the wood used in the construction is 10 gpa.
Answers: 2
You know the right answer?
Based on the following passage, which of the following would be an example of a sustainable input fo...
Questions
question
Mathematics, 26.06.2019 10:40
Questions on the website: 13722363