Engineering, 13.05.2021 14:00 leannadoughty06
1. The WAB Bank decided to open up two new drive-through teller windows outside its main office building in Sariaya, Quezon. The bank is not sure that it needs both windows open all day so it has decided to conduct work sampling study to determine the proportion of time the two tellers are idle between the hours of 10:00AM to 11:30 AM and 1:00 PM to 3:00 PM. The work sampling study was conducted at random over a five-day period and the following observations were recorded: (table on the file) 2. Bank management wants the study to be +/- 5% accurate with a 95% confidence level. How many additional sample observations should be taken? (refer to table)
Answers: 2
Another question on Engineering
Engineering, 03.07.2019 14:10
Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.
Answers: 2
Engineering, 04.07.2019 18:10
Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.
Answers: 2
Engineering, 04.07.2019 18:10
An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature
Answers: 2
Engineering, 04.07.2019 18:20
Asimple rankine cycle uses water as the working fluid. the water enters the turbine at 10 mpa and 480c while the condenser operates at 6 kpa. if the turbine has an isentropic efficiency of 80 percent while the pump has an isentropic efficiency of 70 percent determine the thermal efficiency
Answers: 1
You know the right answer?
1. The WAB Bank decided to open up two new drive-through teller windows outside its main office buil...
Questions
Computers and Technology, 30.10.2020 17:20
Mathematics, 30.10.2020 17:20
Mathematics, 30.10.2020 17:20
History, 30.10.2020 17:20
Mathematics, 30.10.2020 17:20
Chemistry, 30.10.2020 17:20
Mathematics, 30.10.2020 17:20
Mathematics, 30.10.2020 17:20
