subject
Engineering, 10.05.2021 22:20 kelseybell5522

A water preheater consists of a single tube of 10 mm diameter (tube wall is negligibly thin) and 5 m length, with its surface maintained at 120 o C by swirling combustion gases. The water enters at 10 o C. If the flow rate of water is 0.0025 kg/s, what is the mean temperature of water at the exit

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1
Answers: 1
question
Engineering, 04.07.2019 18:10
Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?
Answers: 3
question
Engineering, 04.07.2019 18:20
Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
question
Engineering, 04.07.2019 18:20
Asimple rankine cycle uses water as the working fluid. the water enters the turbine at 10 mpa and 480c while the condenser operates at 6 kpa. if the turbine has an isentropic efficiency of 80 percent while the pump has an isentropic efficiency of 70 percent determine the thermal efficiency
Answers: 1
You know the right answer?
A water preheater consists of a single tube of 10 mm diameter (tube wall is negligibly thin) and 5 m...
Questions
question
Mathematics, 29.06.2019 11:30
question
Mathematics, 29.06.2019 11:30
question
Mathematics, 29.06.2019 11:30
Questions on the website: 13722362