Engineering, 10.05.2021 21:40 shiba8667
laser beam with wavelength λ 591.73 (nm) is collected on a screen 2.16 meters away from a single slit of width 0.85 (mm). FInd the fractional intensity at a point of distance 1.99 (mm) from the center of the principal maximum.
Answers: 2
Engineering, 04.07.2019 18:10
Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux
Answers: 3
Engineering, 04.07.2019 18:10
Carbon dioxide gas expands isotherm a turbine from 1 mpa, 500 k at 200 kpa. assuming the ideal gas model and neglecting the kinetic and potential energies, determine the change in entropy, heat transfer and work for each kilogram of co2.
Answers: 2
Engineering, 04.07.2019 18:10
Hydraulic fluid with a sg. of 0.78 is flowing through a 1.5 in. i.d. pipe at 58 gal/min. the fluid has an absolute viscosity of 11.8 x 105 lbf-sec/ft2. is the flow laminar, turbulent or within the critical range? give both a numerical reynolds number and a term answer.
Answers: 3
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
laser beam with wavelength λ 591.73 (nm) is collected on a screen 2.16 meters away from a single sli...
Mathematics, 15.01.2020 04:31
Mathematics, 15.01.2020 04:31
History, 15.01.2020 04:31
Biology, 15.01.2020 04:31
English, 15.01.2020 04:31
Social Studies, 15.01.2020 04:31
Biology, 15.01.2020 04:31
Computers and Technology, 15.01.2020 04:31
Business, 15.01.2020 04:31