Consider circuit below with VDD = VSS = 5 V, I0 = 500 µA, RL = 7 kΩ, and RSIG = 1kΩ. For MOSFET assume VT = 2 V, (W/L)*kn’ = 4 mA/V2 , and λ = 0 V -1 . 1. Sketch the small signal equivalent circuit and find the values of the small signal parameters; 2. Design RD for maximum output voltage swing; 3. Find the ac voltage gain from signal to load; 4. Find the ac current gain from signal to load.

Afoot bridge is made as a simple deck, 4 m long, with a cross section 2 m (wide) and 20 cm thick, and made of wood. the deck is supported at the two ends. the maximum load allowable on the bridge is 10 tons, provided it is uniformly distributed on the deck. to sense this load, a strain gauge is placed at the center of the bridge and its resistance is monitored. if the sensor has a nominal resistance of 350 s2 and a gauge factor of 3.6, what is the reading of the strain gauge at maximum load? the modulus of elasticity for the wood used in the construction is 10 gpa.