Engineering, 10.05.2021 19:50 Ezonthekid
A structural component in the shape of a flat plate 29.6 mm thick is to be fabricated from a metal alloy for which the yield strength and plane strain fracture toughness values are 544 MPa and 34.3 MPa-m1/2, respectively. For this particular geometry, the value of Y is 1.4. Assuming a design stress of 0.4 times the yield strength, calculate the critical length of a surface flaw.
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 18:10
Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.
Answers: 1
Engineering, 04.07.2019 18:10
You are making beer. the first step is filling the glass carboy with the liquid wort. the internal diameter of the carboy is 15 in., and you wish to fill it up to a depth of 2 ft. if your wort is drawn from the kettle using a siphon process that flows at 3 gpm, how long will it take to fill?
Answers: 1
Engineering, 04.07.2019 18:10
Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?
Answers: 3
Engineering, 04.07.2019 18:20
Find the kinematic pressure of 160kpa. for air, r-287 j/ kg k. and hair al viscosity of air at a temperature of 50°c and an absolute (10 points) (b) find the dynamic viscosity of air at 110 °c. sutherland constant for air is 111k
Answers: 3
You know the right answer?
A structural component in the shape of a flat plate 29.6 mm thick is to be fabricated from a metal a...
Questions
Mathematics, 15.12.2021 06:20
Mathematics, 15.12.2021 06:20
English, 15.12.2021 06:20
Mathematics, 15.12.2021 06:20
Mathematics, 15.12.2021 06:20
Physics, 15.12.2021 06:20
Mathematics, 15.12.2021 06:20
English, 15.12.2021 06:20
Mathematics, 15.12.2021 06:30
Mathematics, 15.12.2021 06:30
Arts, 15.12.2021 06:30
Mathematics, 15.12.2021 06:30
